Eshop roka 2025 s vykurovacou technikou

Bøjning 45° PRESS GAS - 54mm IVAR.IVN22 GAS

Kode: IVNGAS22.54
Ikke bedømt Detaljer om bedømmelse
kr401,78 –20 %
Vykurovacia technika Oblúk 45° PRESS GAS - 54mm
kr401,78 –20 % kr321,42 / stk. kr261,32 ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Bøjning 45° PRESS GAS - 54mm

Bemærk: Dimensionerne på PRESS GAS fittings 76,1, 88,9 og 108 mm er på skaffevare.

Ofte stillede spørgsmål

  • Hvilket værktøj skal jeg bruge til montering af dette fitting? Pressfittings kræver specialiserede presstænger med den korrekte type kæbe (normalt betegnet B, F eller TH afhængigt af systemet) svarende til fittingens dimension og type - uden det korrekte værktøj kan samlingen ikke laves eller kontrolleres.
  • Hvordan ved jeg, at samlingen er korrekt presset? Kvalitets pressfittings har en indikator for presning (f.eks. en tætningsring, der lækker ved ufuldstændig presning) - før den støbes ind i væggen eller gulvet, er det altid nødvendigt at udføre en trykprøve af hele systemet.
  • Kan samlingen adskilles efter presning? Nej, i modsætning til skruet (zverné) skruetøj er pressamlingen permanent, og dens adskillelse kræver, at fittinget skæres af og udskiftes med et nyt.
  • Skal monteringen udføres af en professionel? Ja, presning af fittings kræver professionel ekspertise og korrekt kalibreret værktøj - vi anbefaler at overlade det til en varmeinstallatør/VVS-installatør, især ved samlinger, der skal støbes ind i væggen eller gulvet uden mulighed for efterfølgende kontrol.

Yderligere parametre

Kategori: IVAR.IVN22 GAS - buer 45° FF PRESS GAS
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:03:35

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

P Avatar af forfatter 09.11.2026 20:38
Uprzejmie proszę o informację, czy po wykonaniu połączenia lutowanego istnieje możliwość jego demontażu w przypadku konieczności wprowadzenia korekty na instalacji, czy też wymagana byłaby wymiana kształtki na nową?
A Avatar af forfatter 09.11.2026 20:38
Niestety nie - połączenie press po zalutowaniu jest trwałe i nie da się go rozkręcić jak w przypadku złączek gwintowanych. Jeśli trzeba będzie coś poprawić, kształtkę trzeba przeciąć i wstawić nową. Dlatego zanim połączenie zostanie zalane w ścianie czy stropie, warto zrobić próbę ciśnienia całej instalacji - uszczelka O-ring w tej kształtce też działa jako wskaźnik, czy lutowanie wyszło poprawnie.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.