Eshop roka 2025 s vykurovacou technikou

Bøjning PUSH 90°- PPSU - 16x16 IVAR.PUSH-K

Kode: 88316200
Ikke bedømt Detaljer om bedømmelse
kr91,50 –20 %
Vykurovacia technika Koleno PUSH 90°- PPSU - 16x16
kr91,50 –20 % kr73,18 / stk. kr59,50 ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Knæ 90° - PPSU, IVAR.PUSH - K, størrelse: 16 x 16, pakke: 10 stk

 

  • PN 10, T = +120 °C
  • til nem montering af ALPEX-rør med samme diameter uden brug af presværktøj
  • materiale plast PPSU, klemring rustfrit stål, pakning EPDM

Ofte stillede spørgsmål

  • Hvilket værktøj skal jeg bruge til montering af dette fitting? Presfittings kræver specialtænger med det korrekte type kæbe (normalt betegnet B, F eller TH afhængigt af systemet) svarende til fittingens størrelse og type - uden det korrekte værktøj kan samlingen ikke laves eller kontrolleres.
  • Hvordan ved jeg, at samlingen er korrekt presset? Kvalitets presfittings har en indikator for presning (f.eks. en tætnings O-ring, der lækker ved ufuldstændig presning) - før den støbes ind i væggen eller gulvet, er det altid nødvendigt at udføre en trykprøve af hele systemet.
  • Kan samlingen adskilles efter presning? Nej, i modsætning til skruet (klemrings) fittings er en presset montering permanent, og dens adskillelse kræver, at fittinget skæres af og udskiftes med et nyt.
  • Skal monteringen udføres af en fagmand? Ja, presning af fittings kræver faglig dygtighed og korrekt kalibreret værktøj - vi anbefaler at overlade det til en VVS-installatør, især ved samlinger, der skal støbes ind i væggen eller gulvet uden mulighed for efterfølgende kontrol.

Yderligere parametre

Kategori: PUSH knæ 90° - PPSU
Garanti: 2 år
Vægt: 0.066 kg
EAN: 4013960367997
Fittingtype: bøjning / bue
Rørdiameter: 16 mm
Materiale: plast
Tilslutningstype: push-fit
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 26.05.2026 13:39:10

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

T Avatar af forfatter 05.10.2026 11:44
Hello, I am writing to inquire if the PUSH elbow 90° in PPSU size 16 x 16 is fully compatible with ALPEX pipes of the same diameter for a system operating at temperatures up to +120 °C, and whether this specific fitting can be disassembled after installation if an adjustment becomes necessary.
A Avatar af forfatter 05.10.2026 11:44
Yes, this fitting is designed specifically for easy connection of ALPEX pipes with the same diameters and handles temperatures up to +120 °C. However, please note that once pressed, the joint is permanent and cannot be taken apart without cutting out the fitting and replacing it with a new one. For more details on installation requirements, you may also want to check our other products in the category of elbows PUSH 90° - PPSU.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.