Eshop roka 2025 s vykurovacou technikou

Bøjning - rør/indre gevind - 25x3/4"; PE til udvendigt gevind FIV.07700

Kode: I07700034
Ikke bedømt Detaljer om bedømmelse
15,74 € –20 %
Vykurovacia technika Koleno - potrubie/vnútorný závit - 25x3/4"; PE na vonkajší závit
15,74 € –20 % 12,59 € / stk. 10,24 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Albue - rør/indvendig gevind - 25x3/4"; PE/udvendig gevind

  • PN 16, T = -20 °C til +90 °C
  • til hjørneforbindelse af PE-rør til udvendig gevind
  • materiale til krop messing CW617N iht. EN 12165, klemringsring messing CW614N iht. EN 12164, O-ring NBR, O-ring STOP

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige fittingsstørrelse? Gevindets dimension skal præcist matche gevindet på røret eller armaturet, som fittingen tilsluttes - forkortelserne FF (indvendig-indvendig gevind) og MF (udvendig-indvendig) i navnet angiver typen af gevind på hver side.
  • Er der behov for tætningsmateriale ved montering? Ja, teflonbånd eller hampfibre med tætningspasta bruges standard på gevindforbindelser for at sikre en perfekt tæthed af samlingen.
  • Skal monteringen udføres af en fagmand? En simpel gevindforbindelse kan håndteres af en gør-det-selv-mand med basale færdigheder, men ved indgreb i et eksisterende distributionssystem (især gas) anbefaler vi at tilkalde en installatør, som også kontrollerer samlingens tæthed.

Yderligere parametre

Kategori: knæ - indvendigt gevind
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:03:12

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

P Avatar af forfatter 28.10.2026 08:37
I bought a 25mm pipe and need to connect it to a metal pipe with threads, but I'm not sure if this part will fit or if I need extra tape to stop leaks.
A Avatar af forfatter 28.10.2026 08:37
This elbow is designed exactly for that, connecting your 25mm PE pipe to a 3/4" male thread using a brass body. Yes, you should use PTFE tape or hemp fibre with paste on the threaded parts to make sure it stays tight. If you are not comfortable doing this yourself, it is always best to ask a professional plumber to check the connection.
C Avatar af forfatter 03.10.2026 16:34
Me gustaría confirmar si este codo de latón CW617N es compatible con mi tubería de polietileno de 25 mm y si la temperatura máxima de 90 °C permite su uso en una instalación de agua caliente sanitaria sin riesgo de deformación.
A Avatar af forfatter 03.10.2026 16:34
Sí, el producto está diseñado específicamente para conectar tuberías PE de 25 mm con rosca externa y soporta temperaturas hasta 90 °C, por lo que es apto para su uso en agua caliente. Recuerde utilizar cinta de teflón o cáñamo con pasta durante la instalación para garantizar una junta hermética. Si prefiere ver otros accesorios roscados similares, puede consultar nuestra categoría de accesorios roscados.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.