Eshop roka 2025 s vykurovacou technikou

Etui - 20 FIV.07005

Kode: I07005012
Ikke bedømt Detaljer om bedømmelse
kr16,07 –19 %
Vykurovacia technika Púzdro - 20
kr16,07 –19 % kr12,86 / stk. kr10,46 ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Hylster - 20

  • PN 16, T = -20 °C til +90 °C
  • bruges til at forstærke PE-rør mod deformation
  • materiale messing CW617N i henhold til EN 12165

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige fittings størrelse? Gevindets dimension skal præcist matche gevindet på røret eller armaturet, som fittingen tilsluttes - forkortelserne FF (indvendigt-indvendigt gevind) og MF (udvendigt-indvendigt) i navnet angiver typen af gevind på hver side.
  • Er der behov for tætningsmateriale ved montering? Ja, teflonbånd eller hampfibre med tætningspasta bruges standardmæssigt på gevindforbindelser for at sikre en perfekt tætning af samlingen.
  • Skal monteringen udføres af en fagmand? En simpel gevindforbindelse kan håndteres af en gør-det-selv-mand med basale færdigheder, men ved indgreb i et allerede funktionelt distributionssystem (især gas) anbefaler vi at tilkalde en installatør, som også verificerer samlingens tæthed.

Yderligere parametre

Kategori: muffer
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:08:03

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

M Avatar af forfatter 27.10.2026 18:13
Ho comprato questa protezione per le mie tubazioni e non so se riesco a montarla da solo con un po' di manualità o devo per forza chiamare un idraulico, visto che il tubo è già installato.
A Avatar af forfatter 27.10.2026 18:13
Se si tratta di un collegamento semplice puoi provare a farlo da solo, ma dato che hai già l'impianto in funzione ti consigliamo vivamente di chiamare un idraulico professionista. In questo modo sarà lui a verificare che la giunzione sia perfettamente tenuta e sicura.
M Avatar af forfatter 20.09.2026 20:46
Zdravím, mám záujem o toto púzdro, ale neviem presne, pre aký typ produktu je určené – dá sa niekde zistiť jeho rozmery alebo k čomu presne patrí?
A Avatar af forfatter 20.09.2026 20:46
Bohužiaľ, pri tomto produkte máme momentálne len základné označenie bez podrobnejších parametrov. Odporúčam nás kontaktovať priamo cez e-mail alebo telefón, radi vám upresníme detaily a poradíme, či je pre vás vhodný.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.