Eshop roka 2025 s vykurovacou technikou

Flange - med stuts til presning - rustfrit stål AISI 316 - 15mm IVAR.IVN52

Kode: IVN52.15
Ikke bedømt Detaljer om bedømmelse
62,61 € –20 %
Vykurovacia technika Príruba - s nátrubkom pre zalisovanie - nerez AISI 316 - 15mm
62,61 € –20 % 50,09 € / stk. 40,72 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

  • PN 16, T = -20 °C til +85 °C - max. +120 °C
  • flange med stuts til presning DN x PRESS
  • anvendelsesområde: til sanitære installationer, sprinkleranlæg,
    opvarmningssystemer, trykluft, solenergisystemer, inertgasser og industri
  • materiale: rustfrit stål af typen Wst. Nr. 1.4404 (AISI 316L), O-ring EPDM

Bemærk: Utæt hvis ikke presset korrekt og med presindikator op til 54 mm.

Ofte stillede spørgsmål

  • Hvad er dette rør beregnet til? Den præcise bestemmelse (vandforsyning, opvarmning, gas, solenergisystemer, trykluft osv.) findes i beskrivelsen og de tekniske specifikationer for dette produkt - forskellige materialer (rustfrit stål, kulstofstål) har forskellig korrosionsbestandighed og er certificeret til forskellige medier.
  • Hvordan samles dette rør? Normalt ved presning (press) eller svejsning, afhængigt af det specifikke system og diameteren - sørg for at bruge kompatible fittings fra samme system.
  • Skal monteringen udføres af en fagmand? Ja, især ved gasforsyning, trykluft eller ved svejsede samlinger er monteringen forbeholdt en person med passende kvalifikationer.

Yderligere parametre

Kategori: IVAR.IVN52 - flanger
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 26.05.2026 8:49:27

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

M Avatar af forfatter 02.11.2026 18:20
Bonjour, je ne comprends pas bien comment cette bride tient sur le tuyau, est-ce qu'il faut la visser ou il faut faire quelque chose de spécial pour que ça ne fuie pas ? Je voudrais l'installer moi-même sans faire de bêtise.
A Avatar af forfatter 02.11.2026 18:20
Bonjour Marc, cette bride se fixe par sertissage, pas par vissage : il faut un outil de sertissage adapté au diamètre 15 mm pour que le raccord soit étanche. Tant qu'elle n'est pas sertie correctement, elle n'est pas étanche, c'est d'ailleurs indiqué sur le produit lui-même grâce à l'indicateur de sertissage. Vu que ça demande l'outil et un bon coup de main, mieux vaut faire appel à un professionnel pour cette étape, surtout si c'est pour du chauffage ou du sanitaire.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.