Eshop roka 2025 s vykurovacou technikou

Indgangsrist - til IVAR.SLI DC 800 IVAR.FDR1

Kode: DR0329II
Ikke bedømt Detaljer om bedømmelse
kr2 261,76 –20 %
Vykurovacia technika Vstupná mriežka - pre IVAR.SLI DC 800
kr2 261,76 –20 % kr1 809,37 / stk. kr1 471,03 ekskl. moms Mål pris:
International levering
Skaffevare (1-2 uger)

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Indgangsrist - til IVAR.SLI DC 800

Ofte stillede spørgsmål

  • Hvordan sikrer jeg, at dette produkt passer til mit system? Sammenlign dimensioner, materiale og tekniske specifikationer i beskrivelsen med kravene til dit specifikke system. Hvis du er i tvivl, kontakt os med en præcis beskrivelse af din installation.
  • Skal monteringen udføres af en fagmand? Ved enklere dele kan en dygtig gør-det-selv'er udføre monteringen, men ved indgreb i gas-, el- eller trykfordelinger anbefaler vi altid en professionel tekniker.

Yderligere parametre

Kategori: IVAR.FDR1 - indgangsrist
Type: tilbehør
Posledná aktuálizacia ceny: 13.04.2026 1:03:05

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

Š Avatar af forfatter 13.11.2026 07:37
Mám doma IVAR.SLI DC 800 a chcel by som vedieť, či táto mriežka z tej istej série bude sedieť presne na môj kotol, alebo musím hľadať niečo iné?
A Avatar af forfatter 13.11.2026 07:37
Táto vstupná mriežka je priamo určená pre model IVAR.SLI DC 800, takže by mala sedieť bez problémov. Ak si však nie istý rozmerom alebo materiálom, porovnaj ich s popisom v technických parametroch produktu. Pri akýchkoľvek nejasnostiach nám stačí napísať s presným popisom vášho zapojenia.
L Avatar af forfatter 26.10.2026 11:36
Üdvözlöm, a szüleimnek keresünk egy beömlő rácsot az IVAR.SLI DC 800-as rendszerhez. A leírásban írt méretet és anyagot összehasonlítom a meglévővel, de ha mégsem stimmelne, akkor kikérdezzük a pontos bekötést? Vagy már most tudjátok, hogy ez kompatibilis-e?
A Avatar af forfatter 26.10.2026 11:36
Igen, a legjobb, ha először összehasonlítod a leírásban lévő méreteket és anyagot a saját rendszereddel. Ha bizonytalan vagy, csak írj nekünk a pontos bekötés leírásával, és segítünk eldönteni, hogy jó-e. A szerelést ügyes barkácsoló is meg tudja csinálni, de gáz- vagy elektromos rendszernél inkább szakemberre bízd.
R Avatar af forfatter 20.08.2026 23:02
Zaujímalo by ma, či je vstupná mriežka IVAR.FDR1 určená výhradne pre model IVAR.SLI DC 800, alebo je kompatibilná aj s inými rozmermi podlahových konvektorov z tejto série.
A Avatar af forfatter 20.08.2026 23:02
Táto mriežka je navrhnutá priamo pre IVAR.SLI DC 800, takže s inými rozmermi konvektorov z tejto série nemusí sedieť. Ak máte iný model, odporúčame si skontrolovať, či výrobca ponúka mriežku šitú na mieru práve pre neho – v našej ponuke nájdete vstupné mriežky pre viacero variant tejto série.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.