Eshop roka 2025 s vykurovacou technikou

Muffe - rør/rør- 63x63; PE FIV.07712

Kode: I07712200
Ikke bedømt Detaljer om bedømmelse
kr917,58 –20 %
Vykurovacia technika Spojka - potrubie/potrubie- 63x63; PE
kr917,58 –20 % kr734,06 / stk. kr596,80 ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Styk - rør/rør - 63x63; PE

  • PN 16, T = -20 °C til +90 °C
  • til tilslutning af PE-rør med samme diameter
  • materiale til krop messing CW617N iht. EN 12165, klemringsring messing CW614N iht. EN 12164, O-ring NBR, O-ring STOP

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige fittingsstørrelse? Gevindets dimension skal præcist matche gevindet på røret eller armaturet, som fittingen tilsluttes - forkortelserne FF (indvendigt-indvendigt gevind) og MF (udvendigt-indvendigt) i navnet angiver typen af gevind på hver side.
  • Er der behov for tætningsmateriale ved montering? Ja, teflonbånd eller hampfibre med tætningspasta bruges standardmæssigt på gevindforbindelser for at sikre en perfekt tæthed af samlingen.
  • Skal monteringen udføres af en fagmand? En simpel gevindforbindelse kan også udføres af en gør-det-selv-mand med basale færdigheder, men ved indgreb i et allerede funktionelt distributionssystem (især gas) anbefaler vi at tilkalde en installatør, som også kontrollerer samlingens tæthed.

Yderligere parametre

Kategori: Fittings - rør / rør
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:10:30

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

J Avatar af forfatter 29.10.2026 16:34
Jó napot kívánok, szeretném megkérdezni, hogy ez a 63x63-as karmantyú alkalmas-e két azonos külső átmérőjű PE csővezeték tartós, menet nélküli összekötésére, vagy kizárólag ideiglenes, javítási célú felhasználásra ajánlott? Továbbá érdeklődnék, hogy -20 °C alatti környezeti hőmérséklet esetén számíthatok-e a tömítés épségének megőrzésére.
A Avatar af forfatter 29.10.2026 16:34
Jó napot kívánok! Ez a karmantyú nyugodtan használható tartós kötésre is, nem csak ideiglenes javításra - a PN 16 nyomásra és -20 °C-tól +90 °C-ig terjedő hőmérséklet-tartományra van tervezve, szóval normál üzemi körülmények között megbízhatóan tartja a kötést. A tömítést az NBR O-gyűrű adja, a szorítógyűrű pedig sárgarézből készül, ezek együtt biztosítják a tartósságot. -20 °C alá viszont már nem ajánlott menni, mert az a megadott tartomány határa.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.