Eshop roka 2025 s vykurovacou technikou

O-ring - 88,9mm; EPDM (sort) IVAR.IVO.EPDM

Kode: I000728
Ikke bedømt Detaljer om bedømmelse
kr21,23 –20 %
Vykurovacia technika O-krúžok - 88,9mm; EPDM (čierny)
kr21,23 –20 % kr16,97 / stk. kr13,80 ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

  • PN 16, T = -20 °C til +120 °C
  • O-ring med EPDM til drikkevand, opvarmning og brandbeskyttelsessystemer
 

Ofte stillede spørgsmål

  • Hvad er dette rør beregnet til? Den præcise anvendelse (vandforsyning, opvarmning, gas, solenergisystemer, trykluft osv.) findes i produktets beskrivelse og tekniske specifikationer – forskellige materialer (rustfrit stål, kulstofstål) har forskellig korrosionsbestandighed og er certificeret til forskellige medier.
  • Hvordan samles dette rør? Typisk med pressfittings eller svejsede samlinger, afhængigt af det specifikke system og diameter – sørg for at bruge kompatible fittings fra samme system.
  • Skal monteringen udføres af en fagmand? Ja, især ved gasforsyning, trykluft eller ved svejsede samlinger er monteringen forbeholdt en person med passende kvalifikationer.

Yderligere parametre

Kategori: IVAR.IVO.EPDM - O-ringe EPDM - PN 16
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:12:27

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

M Avatar af forfatter 15.11.2026 09:00
Bonjour, j'ai besoin d'un joint pour mon chauffage mais je ne sais pas si ce noir en caoutchouc peut tenir à la chaleur ou si c'est seulement pour l'eau du robinet ?
A Avatar af forfatter 15.11.2026 09:00
Ce joint est fait pour ça : il résiste bien au chauffage et à l'eau potable entre -20 et +120 degrés. C'est un modèle EPDM standard de 88,9 mm qui convient parfaitement pour votre installation. Vous pouvez vérifier les autres joints de la catégorie IVAR.IVO.EPDM sur notre site si vous avez besoin d'autres tailles.
L Avatar af forfatter 29.10.2026 17:55
Mám doma kúrenie a potrebujem vymeniť takýto krúžok, len neviem či vydrží horúcu vodu z kotla, nechcem aby mi to o rok popraskalo alebo tieklo. Dá sa to dať aj na pitnú vodu, keby som to náhodou pomylil?
A Avatar af forfatter 29.10.2026 17:55
Áno, tento O-krúžok z EPDM zvládne teploty od -20 °C do +120 °C, takže na vykurovanie je úplne v poriadku. Je certifikovaný aj pre pitnú vodu, takže sa netreba báť, že by ste niečo pomiešali. Len dbajte na to, aby sedel presne na váš systém a priemer potrubia.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.