Eshop roka 2025 s vykurovacou technikou

Vægbeslag - 1/2"HxEK IVAR.RM 4760

Kode: 500594
Ikke bedømt Detaljer om bedømmelse
kr63,84 –20 %
Vykurovacia technika Nástenka - 1/2"FxEK
kr63,84 –20 % kr51,05 / stk. kr41,50 ekskl. moms Mål pris:
International levering
på lager (16 stk.)

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

IVAR.RM 4760
 
  • PN 10, T = +120 °C
  • indvendigt gevind F - Eurokone (EK)
  • materiale messing CW617N

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige fittings størrelse? Gevindets dimension skal præcist matche gevindet på røret eller armaturet, som fittingen tilsluttes - forkortelserne FF (indvendigt-indvendigt gevind) og MF (udvendigt-indvendigt) i navnet angiver gevindtypen på hver side.
  • Er der behov for tætningsmateriale ved montering? Ja, teflonbånd eller hørtråd med tætningspasta bruges standard på gevindforbindelser for at sikre en perfekt tætning af samlingen.
  • Skal monteringen udføres af en fagmand? En simpel gevindforbindelse kan udføres af en gør-det-selv person med grundlæggende færdigheder, men ved indgreb i et eksisterende distributionssystem (især gas) anbefaler vi at tilkalde en installatør, som også verificerer samlingens tæthed.

Yderligere parametre

Kategori: Opslagstavler
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:02:59

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

G Avatar af forfatter 07.11.2026 11:15
Jó napot, szeretném megkérdezni, hogy a Fali csatlakozó - 1/2"FxEK (IVAR.RM 4760) beszereléséhez szükséges-e külön tömítőanyag, és ha igen, milyen típusú ajánlott használni a menetes kötés biztosításához?
A Avatar af forfatter 07.11.2026 11:15
Igen, a menetes kötéseknél mindenképpen szükség van tömítőanyagra. A leggyakoribb megoldás a teflonszalag vagy a kenderszál használata tömítőpasztával együtt, hogy biztosítsuk a tökéletes tömítettséget. Ha nem értenek hozzá, érdemes egy szakember segítségét kérni.
R Avatar af forfatter 19.10.2026 13:15
Dobrý deň, chcel by som sa opýtať, či je tento fiting vyrobený z mosadze CW617N a aký maximálny prevádzkový teplotný rozsah pri použití s teflónovou páskou odporúčate pre bezpečnú funkčnosť?
A Avatar af forfatter 19.10.2026 13:15
Áno, nástenka IVAR.RM 4760 je vyrobená z mosadze CW617N a je určená na prevádzku do teploty +120 °C. Pri montáži je samozrejmosťou použitie tesniacej pásky alebo konopného vlákna s pastou, aby bol spoj úplne tesný.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.