Eshop roka 2025 s vykurovacou technikou

Afløb - 1/2"; L 150mm IVAR.GU

Kode: ACGUOV150
Ikke bedømt Detaljer om bedømmelse
kr94,71 –19 %
Vykurovacia technika Jímka - 1/2"; L 150mm
kr94,71 –19 % kr75,80 / stk. kr61,63 ekskl. moms Mål pris:
International levering
på lager (7 stk.)

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Jímka, IVAR.GU, størrelse: 1/2", L 150 mm

 

  • bestemt til montering af termometer
  • med låseskru
  • indre diameter 9,5 mm
  • længde af jímka 150 mm
  • udvendigt gevind 1/2” M
  • materiale messing CW617N

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Følg det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal svare til eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal svare til rørdiameteren.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykregulering, tilbageflow osv.) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Ved enklere afspærringsventiler kan montagen også udføres af en gør-det-selv-mand, men ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, trykreducerende ventiler) anbefaler vi altid en professionel, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: brønde
Garanti: 2 år
Vægt: 0.08 kg
Gevindstørrelse: 1/2"
Type: dykrør
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:09:47

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

P Avatar af forfatter 09.11.2026 11:14
I have no idea how this thing works, but I need to put a thermometer in my pipe somehow - does this little tube just sit in the pipe and I stick the thermometer inside it, or is it more complicated than that?
A Avatar af forfatter 09.11.2026 11:14
That's exactly right - you weld or screw this brass pocket into the pipe or tank, and the thermometer slides into it afterwards, so you can take it out later without draining the system. This one has a 1/2" external thread, is 150 mm long, and the inside opening is 9.5 mm, so just make sure your thermometer's sensor fits that size and has a locking screw to hold it in place. If you're not sure about fitting it into your system, it's a simple job, but if anything feels off, a plumber can sort it out in a few minutes.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.