Eshop roka 2025 s vykurovacou technikou

Bøjning PRESS-GAS 90° - 26x26 IVAR.PT 5710-GAS

Kode: 511011GAS
Ikke bedømt Detaljer om bedømmelse
kr148,97 –20 %
Vykurovacia technika Koleno PRESS-GAS 90° - 26x26
kr148,97 –20 % kr119,15 / stk. kr96,87 ekskl. moms Mål pris:
International levering
på lager (17 stk.)

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Knæ PRESS-GAS 90°, IVAR.PT 5710-GAS, størrelse: 26 x 26, pakning: 5 i pose / 80 i hele kasse

 

  • maksimalt tryk PN 10, T = -20 °C til +60 °C
  • maksimalt driftstryk PN 5
  • til tilslutning af ALPEX-GAS rør med samme diameter
  • materiale messing CW617N, pakning HNBR
  • kompatibel med kæber af type B

 

Anbefalet anvendelse ifølge PTN 704 05

Ofte stillede spørgsmål

  • Hvilket værktøj skal jeg bruge til montering af dette fitting? Pressfittings kræver specialiserede presstænger med den korrekte type kæbe (normalt betegnet B, F eller TH afhængigt af systemet) svarende til fittingens størrelse og type - uden det korrekte værktøj kan samlingen ikke laves eller kontrolleres.
  • Hvordan ved jeg, at samlingen er korrekt presset? Kvalitets pressfittings har en indikator for presning (f.eks. en tætnings O-ring, der lækker ved ufuldstændig presning) - før den støbes ind i væggen eller gulvet, skal der altid udføres en trykprøve på hele systemet.
  • Kan samlingen adskilles efter presning? Nej, i modsætning til skruet fittings er en pressamling permanent, og dens adskillelse kræver, at fittinget skæres af og udskiftes med et nyt.
  • Skal monteringen udføres af en fagmand? Ja, presning af fittings kræver faglig dygtighed og korrekt kalibreret værktøj - vi anbefaler at overlade det til en varmeinstallatør/VVS-installatør, især ved samlinger, der skal støbes ind i væggen eller gulvet uden mulighed for efterfølgende kontrol.

Yderligere parametre

Kategori: IVAR.PT 5710-GAS - knæ
Garanti: 2 år
Vægt: 0.184 kg
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:04:22

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

R Avatar af forfatter 17.11.2026 10:47
Dobrý den, mám kleště s čelistmi typu B na jiný pressový systém pro vodu - dají se použít i na toto koleno PRESS-GAS, nebo potřebuji speciální čelisti jen pro plyn?
A Avatar af forfatter 17.11.2026 10:47
Dobrý den, pokud máte čelisti typu B, které jsou kalibrované a v dobrém stavu, tak jsou s tímto kolenem kompatibilní, protože IVAR.PT 5710-GAS je na čelisti typu B přímo určený. Jen si před montáží ověřte, že rozměr čelistí sedí na 26mm a že je nářadí určené i pro plynové rozvody (certifikace se u plynu bere přísněji). Každopádně doporučujeme montáž svěřit odborníkovi, protože jde o rozvod plynu a spoj se po zalisování už nedá rozebrat.
P Avatar af forfatter 28.10.2026 10:38
Salve, ho comprato questo gomito da 26mm per tubi del gas e non so se posso montarlo io stesso con un semplice attrezzo o se serve proprio qualcuno specializzato, perché mi hanno detto che è pericoloso farlo da soli.
A Avatar af forfatter 28.10.2026 10:39
Ciao Pietro, per i raccordi a pressione come questo serve assolutamente un tecnico specializzato con gli attrezzi giusti, perché l'unione è permanente e sicura solo se fatta correttamente. Ti consigliamo di affidarti a un idraulico o un caldaista per evitare rischi e garantire la tenuta dell'impianto.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.