Eshop roka 2025 s vykurovacou technikou

Flangekugleventil - serie B2.1 kugle og spindel rustfrit stål - DN 80; L=180mm BRA.B2.111

Kode: B2111080
Ikke bedømt Detaljer om bedømmelse
660,51 € –20 %
Vykurovacia technika Guľový uzáver prírubový - séria B2.1 guľa a driek nerez - DN 80; L=180mm
660,51 € –20 % 528,41 € / stk. 429,60 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Kugleventil flanged - kugle og spindel rustfrit stål, BRA.B2.111, størrelse: DN 80, længde: 180 mm
 
  • maks. tryk 16 bar (ende af røret maks. 10 bar), flanger PN 16 iht. STN EN 1092-1
  • T = -10 °C til +100 °C
  • til opvarmning og aircondition (HVAC), vandforsyning og trykluft
  • materiale: hus - støbejern GJS 400-15, kugle og spindel - rustfrit stål AISI 304, 2 x O-ring - NBR
  • med delbart hus
  • fuldt gennemløb
  • kan anvendes med aktuatorer
  • tilslutning iht. ISO 5211
  • ikke egnet til damp og flow styring
  • ATTEST til drikkevand, RÚVZ Poprad

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Følg det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal svare til eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal svare til rørets diameter.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, tryk styring, tilbageflow og lignende) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Enkle afspærringsventiler kan monteres af en gør-det-selv person, men ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en professionel, da det er elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: BRA.B2.111 - GV B2.111
Garanti: 2 år
Vægt: 15.1 kg
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:06:21

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

B Avatar af forfatter 18.11.2026 16:46
Je dois installer cette vanne sur une conduite de vapeur basse pression dans une petite installation collective, est-ce que ce modèle convient ?
A Avatar af forfatter 18.11.2026 16:46
Non, cette vanne n'est pas adaptée pour la vapeur, c'est précisé dans les caractéristiques du produit. Elle est prévue pour le chauffage, la climatisation et les réseaux d'eau et d'air sous pression, avec une plage de température de -10°C à +100°C. Pour une application vapeur, il faut vous orienter vers un modèle spécifiquement conçu pour ça, n'hésitez pas à écrire à la boutique si vous avez besoin d'aide pour trouver la bonne référence.
S Avatar af forfatter 23.10.2026 20:23
Ich brauche ein Ventil für meine Heizung, das genau DN 80 passt und bis 16 bar Druck aushält. Passt das hier wirklich, oder ist es nur für Wasser gedacht?
A Avatar af forfatter 23.10.2026 20:23
Hallo Sebastian, ja, dieser Hahn ist genau für DN 80 ausgelegt und hält bis zu 16 bar Druck aus. Er eignet sich perfekt für Heizungs- und Klimaanlagen sowie für Wasserleitungen, solange die Temperatur zwischen -10 und +100 Grad liegt. Für Dampf oder Trinkwasser solltest du ihn jedoch nicht verwenden.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.