Eshop roka 2025 s vykurovacou technikou

Fleksibel slange flettet rustfrit stål - 2"FF (50x65); 50cm IVAR.2512

Kode: 25126050
Ikke bedømt Detaljer om bedømmelse
121,28 € –20 %
Vykurovacia technika Flexi hadica opletenie nerez  - 2"FF (50x65); 50cm
121,28 € –20 % 97,02 € / stk. 78,88 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Flexi slange med rustfrit stål fletning, IVAR.2512, størrelse: 2" FF (50 x 65), længde: 50 cm 
 
  • PN 6, T = +110 °C
  • gevind indvendigt - indvendigt FF
  • GODKENDT til drikkevand, RÚVZ Poprad

 

Bemærk: 
Længder på 30 og 70 cm er skaffevare, værdierne i parentes angiver slanges indre og ydre diameter i mm.

 

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Ret dig efter det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal svare til eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal svare til rørdiameteren.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykstyring, tilbageflow og lignende) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Ved enklere afspærringsventiler kan montagen også udføres af en gør-det-selv-mand, men ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en professionel, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: Indvendigt - indvendigt gevind
Garanti: 2 år
Vægt: 1.93 kg
Gevindstørrelse: 2"
Længde: 31 – 50 cm
Slangetype: rustfri flettet slange
Tilslutningstype: indvendigt gevind
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:09:08

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

A Avatar af forfatter 01.11.2026 22:52
Ciao, devo collegare un bollitore con attacchi da 2" femmina: questo flessibile da 50 cm regge una pressione di esercizio di 8 bar e temperature dell'acqua intorno ai 70°C senza problemi?
A Avatar af forfatter 01.11.2026 22:52
Ciao Alberto, questo flessibile ha una PN 6, quindi la pressione massima di esercizio è 6 bar, non 8 - su questo punto ti consigliamo di verificare bene l'impianto prima di montarlo. La temperatura invece non è un problema, perché regge fino a 110°C. Le dimensioni sono 2" FF con diametro interno/esterno 50x65 mm, lunghezza 50 cm.
J Avatar af forfatter 30.10.2026 08:34
Tisztelt Címzett!
A Avatar af forfatter 30.10.2026 08:34
Tisztelt Jakab Úr! A Flexi tömlő rozsdamentes fonattal - 2"FF (50x65); 50cm termék a beszállító raktárában van, így Budapestre a szállítás kb. 3–7 nap. Az ára 35 504 Ft/db bruttó, tehát 2 db esetén 71 008 Ft bruttó. A szállítási költség a rendelés során a kosárban jelenik meg, a megrendelés véglegesítése előtt. A termék itt található: https://www.atria.hu/flexi-tomlo-rozsdamentes-fonattal-2-ff-50x65-50cm/

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.