Eshop roka 2025 s vykurovacou technikou

Fleksibel slange flettet rustfrit stål - 5/4"FF (32x42); 100cm IVAR.2512

Kode: 25124299
Ikke bedømt Detaljer om bedømmelse
84,87 € –20 %
Vykurovacia technika Flexi hadica opletenie nerez  - 5/4"FF (32x42); 100cm
84,87 € –20 % 67,90 € / stk. 55,20 € ekskl. moms Mål pris:
International levering
Skaffevare (1-2 uger)

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Flexi slange med rustfrit stål fletning, IVAR.2512, størrelse: 5/4" FF (32 x 42), længde: 100 cm 
 
  • PN 10, T = +110 °C
  • gevind indvendigt - indvendigt FF
  • GODKENDT til drikkevand, RÚVZ Poprad

 

Bemærk: 
Længder på 30 og 70 cm er skaffevare, værdierne i parentes angiver slanges indre og ydre diameter i mm.

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Følg det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal matche eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal matche rørets diameter.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykstyring, tilbageflow og lignende) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Ved enklere afspærringsventiler kan en gør-det-selv-mand klare monteringen, men ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en professionel, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: Indvendigt - indvendigt gevind
Garanti: 2 år
Vægt: 1.3 kg
Gevindstørrelse: 5/4"
Længde: 51 – 100 cm
Slangetype: rustfri flettet slange
Tilslutningstype: indvendigt gevind
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:07:35

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

C Avatar af forfatter 09.11.2026 07:11
Need this on my boiler running at 95°C constant - does it actually handle that or will it degrade over time? Also is 1m too long for a tight utility closet, can I get it shorter?
A Avatar af forfatter 09.11.2026 07:11
You're fine - it's rated PN10 and up to 110°C, so running at 95°C is within spec, no degradation issue there. If 100cm is too long for your space, 30cm and 70cm versions are available on request, just contact us for that. Worth double-checking your fitting size matches 5/4" FF (32x42) before ordering.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.