Eshop roka 2025 s vykurovacou technikou

Fordeler/samler-enhed - uden kabinet - 5/4"xEK; 3-vejs; messing IVAR.CS 553 D

Kode: 400283
Ikke bedømt Detaljer om bedømmelse
200,49 € –20 %
Vykurovacia technika Zostava rozdeľovač/zberač - bez skrine - 5/4"xEK; 3cestný; mosadz
200,49 € –20 % 160,39 € / stk. 130,40 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Fordeler/samler-sæt - uden skab - 5/4"xEK; 3-vejs; messing

  • PN 10, T = +120 °C
  • sættet indeholder: fordeler med reguleringsskruer, samler med spærreventiler, monteringsbeslag
  • materiale messing CW617N
    Bemærk:
    Før hver idtagning af varmesystemet, især
    ved kombination af gulvvarme og radiatoropvarmning,
    opfordrer vi kraftigt til at skylle hele systemet i henhold til producentens anvisninger. Vi anbefaler behandling af varmesystemet med produktet
    GEL.LONG LIFE 100. Sælgeren er ikke ansvarlig for funktionsfejl forårsaget af snavs i systemet.

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige fordeler/tilbehør? Ret dig efter antallet af nødvendige kredsløb og tilslutningsstørrelsen - den skal svare til diameteren på hovedforsyningsrøret fra varmekilden.
  • Skal monteringen udføres af en fagmand? Montering af selve fordeleren og dens tilbehør kan også udføres af en dygtig handyman, men vi anbefaler, at tilslutning til et funktionelt varmesystem og dets indstilling udføres af en VVS-tekniker.

Yderligere parametre

Kategori: IVAR.CS 553 D - fordelersæt uden skab
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 27.04.2026 3:20:56

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

T Avatar af forfatter 09.11.2026 20:18
Good morning, I have a 5/4" main supply pipe from my boiler and need 3 circuits for underfloor heating - will this manifold set work directly with that pipe size, or do I need extra fittings?
A Avatar af forfatter 09.11.2026 20:18
Good morning Tom, this set is made exactly for 5/4" connection on the main side with EK fittings, so it matches your supply pipe without any extra reducers. It's a 3-way version, so you'll have 3 circuits on the collector with shut-off valves included. Everything is brass (CW617N), rated PN 10 and up to 120°C, and comes without the cabinet. Just keep in mind, before putting it into operation we recommend flushing the whole system first, especially when combining underfloor and radiator heating.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.