Eshop roka 2025 s vykurovacou technikou

IVAR.INOX rør - rustfrit stål AISI 316 L - 88,9mm; 2mm - 6m IVAR.IVINT

Kode: IVINT.89
Ikke bedømt Detaljer om bedømmelse
137,76 € –20 %
Vykurovacia technika Potrubie IVAR.INOX  - nerezová oceľ AISI 316 L - 88,9mm; 2mm - 6m
137,76 € –20 % 110,21 € / m 89,60 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Rør IVAR.INOX - rustfrit stål AISI 316 L - 88,9mm; 2mm - 6m

  • materiale rustfrit stål kvalitet Wst. Nr. 1.4307 (AISI 304L)
  • anvendelsesformål: til sanitære installationer, trykluft, industri og andre applikationer
  • certificering SZÚ Brno, DVGW

 

Ofte stillede spørgsmål

  • Hvad er dette rør beregnet til? Den præcise bestemmelse (vandforsyning, varme, gas, solenergisystemer, trykluft osv.) findes i beskrivelsen og de tekniske specifikationer for dette produkt - forskellige materialer (rustfrit stål, kulstofstål) har forskellig korrosionsbestandighed og er certificeret til forskellige medier.
  • Hvordan samles dette rør? Normalt med pressfittings eller svejsede samlinger, afhængigt af det specifikke system og diameter - sørg for at bruge kompatible fittings af samme system.
  • Skal monteringen udføres af en fagmand? Ja, især ved gasinstallationer, trykluft eller ved svejsede samlinger er monteringen forbeholdt en person med passende faglig kvalifikation.

Yderligere parametre

Kategori: IVAR.IVINT,IVINT4 - Rør IVAR.INOX
Garanti: 2 år
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 03.07.2026 1:24:41

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

R Avatar af forfatter 13.09.2026 21:12
I am planning to install a high-temperature exhaust system for a commercial boiler installation and would like to confirm whether this IVAR.INOX pipe, made from AISI 316L stainless steel with a diameter of 88.9mm and a wall thickness of 2mm, is suitable for flue gas applications involving condensate exposure over extended periods of operation.
A Avatar af forfatter 13.09.2026 21:12
Yes, AISI 316L is a low-carbon grade of stainless steel specifically chosen for its improved resistance to corrosion, including the kind of acidic condensate you get in flue gas systems. The 2mm wall thickness on an 88.9mm pipe gives you solid structural durability for that kind of installation. Each length is 6 metres, which is useful for longer runs with fewer joints. If you need fittings or connectors to go with it, we carry the rest of the IVAR.INOX range as well.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.