Eshop roka 2025 s vykurovacou technikou

Press overgang - overgangsmøtrik - 1"Fx32 IVAR.PT 5703

Kode: 510089
Ikke bedømt Detaljer om bedømmelse
14,64 € –20 %
Vykurovacia technika Prechodka PRESS  - prevlečná matica - 1"Fx32
14,64 € –20 % 11,71 € / stk. 9,52 € ekskl. moms Mål pris:
International levering
på lager (3 stk.)

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Press overgang - overgangsmøtrik, IVAR.PT 5703, størrelse: 1" G x 32, pakning: 5 i pose / 100 i hel kasse 

 

Ofte stillede spørgsmål

  • Hvilket værktøj skal jeg bruge til montering af dette fitting? Pressfittings kræver specialiserede presstænger med den korrekte type kæbe (normalt betegnet B, F eller TH afhængigt af systemet) svarende til fittingens størrelse og type - uden det korrekte værktøj kan samlingen ikke laves eller kontrolleres.
  • Hvordan ved jeg, at samlingen er korrekt presset? Kvalitets pressfittings har en indikator for presning (f.eks. en tætnings O-ring, der lækker, hvis presningen er ufuldstændig) - før den støbes ind i væggen eller gulvet, skal du altid udføre en trykprøve af hele systemet.
  • Kan samlingen adskilles efter presning? Nej, i modsætning til skruet fittings er en pressamling permanent, og dens adskillelse kræver, at fittinget skæres af og udskiftes med et nyt.
  • Skal monteringen udføres af en professionel? Ja, presning af fittings kræver professionel ekspertise og korrekt kalibreret værktøj - vi anbefaler at overlade det til en varmeinstallatør/VVS-installatør, især ved samlinger, der skal støbes ind i væggen eller gulvet uden mulighed for efterfølgende kontrol.

Yderligere parametre

Kategori: PRESS overgangsfitting lige - med overgangsmøtrik
Garanti: 2 år
Vægt: 0.134 kg
Fittingtype: gennemføring / overgang
Rørdiameter: 32 mm
Tilslutningstype: presfitting
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:10:48

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

M Avatar af forfatter 27.10.2026 19:54
Good morning, I am trying to connect my plastic pipe to a metal thread but I am not sure if this piece works for that or if I need a different tool to put it together?
A Avatar af forfatter 27.10.2026 19:54
Yes, this union nut is designed exactly for connecting ALPEX pipes to external threads. You will need special pressing pliers with the right jaws (like B, F, or TH) to install it, as you cannot screw it on like normal fittings. We recommend leaving this work to a professional plumber to ensure the joint is safe and sealed correctly.
T Avatar af forfatter 08.09.2026 13:25
Toto ide na rúrku 32mm, ale aký závit má tá druhá strana, čiže tá 1"F časť? Chcem to napojiť na obyčajný závitový ventil čo máme doma.
A Avatar af forfatter 08.09.2026 13:25
Tá 1"F je vnútorný závit s priemerom jedného palca, čo je štandardný rozmer – väčšina bežných závitových ventilov a armatúr s 1" závitom by mala pasovať. Press strana (32mm) sa potom lisuje na medenú alebo multilayer rúrku. Ak si nie si istý, stačí skontrolovať, aký závit má ten váš ventil.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.