Eshop roka 2025 s vykurovacou technikou

Sigte til sugekurv - til BRA.F5.000 - DN 150; L=200mm BRA.50.000

Kode: 50000150
Ikke bedømt Detaljer om bedømmelse
286,59 € –20 %
Vykurovacia technika Sítko pre sací kôš - na BRA.F5.000 - DN 150; L=200mm
286,59 € –20 % 229,27 € / stk. 186,40 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Sigte til sugekurv - til kontraventil BRA.F5.000, BRA.50.000, størrelse: DN 150, længde: 200 mm

 

  • til montering på flanger PN 16 iht. ČSN EN 1092
  • materiale: galvaniseret stål (skaffevare rustfrit AISI 316 - type BRA.53.000)
  • størrelse på åbninger 5 mm

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Følg det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal svare til eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal svare til rørdiameteren.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykregulering, tilbageflow osv.) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Ved enklere afspærringsventiler kan montagen også udføres af en gør-det-selv-mand, men ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en professionel, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: BRA.50.000 - flange-sier til kontraventil F5
Garanti: 2 år
Vægt: 2.097 kg
Nominel diameter (DN): DN 150
Armaturtype: filter / si
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:09:07

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

S Avatar af forfatter 28.10.2026 08:17
I require confirmation regarding the material composition of this strainer intended for DN 150 flanges, specifically whether the standard galvanized steel construction is sufficient for my system or if a stainless steel AISI 316 variant must be ordered.
A Avatar af forfatter 28.10.2026 08:17
The standard model you selected is indeed made of galvanized steel, which fits your PN 16 flange requirements perfectly. If you need the corrosion-resistant version in stainless steel AISI 316, you should look for the type BRA.53.000 instead. Both options share the same 200 mm length and 5 mm hole size specifications.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.