Eshop roka 2025 s vykurovacou technikou

Kedelmodul HEAT BLOC K31 - umodificeret - DN 32; uden pumpe – TILBUD PAW.K31-DN 32

Kode: 39012
Akcia
Den gennemsnitlige produktvurdering er 5,0 ud af 5 stjerner. 1-vurdering Detaljer om bedømmelse
891,75 € –10 %
Vykurovacia technika Kotlový modul HEAT BLOC K31  - nezmiešavaný - DN 32; bez čerpadla - akcia
891,75 € –10 % 802,58 € / stk. 652,50 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Kedelmodul HEAT BLOC K31 - ubehandlet - DN 32; uden cirkulationspumpe

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige effekt/tryk på cirkulationspumpen? Den skal dække tryktabet i din specifikke kreds (rørlængde, antal fittings) - ved tvivl rådfør dig med en VVS-installatør, som kan dimensionere pumpen præcist for dig.
  • Skal monteringen udføres af en fagmand? Montering af pumpen i det forberedte rørsystem kan også udføres af en handy mand, men vi anbefaler, at du får en fagmand til at kontrollere den elektriske tilslutning og indregulering af systemet.

Yderligere parametre

Kategori: heat bloc kedelmodul - uden blanding
Garanti: 2 år
Vægt: 4.816 kg
EAN: 4251401504154
Nominel diameter (DN): DN 32
Type: kedelmodul / sæt
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 27.02.2026 1:06:46

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Den gennemsnitlige produktvurdering er 5,0 ud af 5 stjerner. 1-vurdering
5
1x
4
0x
3
0x
2
0x
1
0x

Giv en bedømmelse

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Liste over vurderinger

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

F Avatar af forfatter 16.11.2026 21:21
Questo modulo K31 viene senza pompa, quindi devo comprarla a parte giusto? Mio padre vuole collegarlo alla caldaia di casa tramite il collettore PAW, secondo voi quanti kW riesce a reggere questo coso al massimo?
A Avatar af forfatter 16.11.2026 21:21
Esatto, questo modulo è senza circolatore quindi la pompa va scelta e aggiunta a parte in base al circuito di casa tua. Per la potenza, il K31 arriva fino a 65 kW (con ΔT 20 K) e una portata massima di 2800 l/h, quindi va benissimo abbinato al collettore PAW.MV32 come dite voi. Se avete dubbi su quale pompa prendere, meglio farla dimensionare da un tecnico termico in base alla lunghezza dei tubi e ai componenti dell'impianto.
H Avatar af forfatter 28.10.2026 23:06
Hejsan, jag undrar om denna modul fungerar till mitt vanliga radiatornätverk eller om den bara är för golvvärme? Jag har ingen aning om hur man kopplar in den och orkar inte läsa tekniska manualer.
A Avatar af forfatter 28.10.2026 23:06
Hej Henrik! Den här modulen kan du koppla direkt till ditt uppvärmningssystem, oavsett om det är radiatorer eller en fördelare. Den innehåller allt som behövs för att koppla in systemet, men vi rekommenderar att en yrkesman gör de elektriska anslutningarna och regleringen så att det blir rätt.
R Avatar af forfatter 25.07.2026 19:22
Plánujem zapojiť kotol priamo cez tento modul HEAT BLOC K31 DN 32 bez čerpadla – znamená to, že obehové čerpadlo musím mať zabudované priamo v kotli, alebo ho musím dokúpiť a osadiť samostatne niekde inde v rozvodoch?
A Avatar af forfatter 25.07.2026 19:22
Áno, presne tak – modul K31 v tejto verzii je dodávaný bez čerpadla, čo znamená, že obehové čerpadlo musí byť buď súčasťou samotného kotla (tzv. kotol s integrovaným čerpadlom), alebo ho musíte osadiť samostatne na príslušnom mieste v systéme. Táto konfigurácia je bežná pri kotloch, ktoré už čerpadlo v sebe obsahujú, čím sa eliminuje zdvojenie zariadenia a zbytočné náklady. Pripojenie je riešené cez DN 32, čo zodpovedá bežným rozmerom kotlových prípojok väčšiny kondenzačných a nízkoteplotných kotlov na trhu. Pred inštaláciou odporúčame overiť, či prietok zabezpečovaný čerpadlom v kotli pokryje hydraulické nároky celého systému. V prípade, že váš kotol integrované čerpadlo nemá, pozrite si našu ponuku kotlových modulov s čerpadlom, kde nájdete vhodnú alternatívu.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.