Eshop roka 2025 s vykurovacou technikou

Kugleventil flanget - serie 02 til vand rustfrit stål - DN 15; L=115mm BRA.02.622

Kode: I02622015
Ikke bedømt Detaljer om bedømmelse
252,15 € –20 %
Vykurovacia technika Guľový uzáver prírubový - série 02 na vodu nerez - DN 15; L=115mm
252,15 € –20 % 201,72 € / stk. 164 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

  • max. tryk 16 bar, flanger PN 16 iht. STN EN 1092-1
  • T = -25 °C til +150 °C
  • til opvarmning og aircondition (HVAC), vandforsyning, kemisk industri
  • material krop: rustfrit stål A351 CF8M, kugle og spindel rustfrit stål AISI 316
  • material pakning: kugle PTFE, spindel PTFE og FKM (Viton®)
  • med delbar krop, fuldt gennemløb, egnet til brug med aktuatorer, tilslutning iht. ISO 5211
  • antistatisk udførelse, med låsbar håndtag
  • ikke egnet til damp og styring af flow
  • ATTEST til drikkevand, RÚVZ Poprad, ATEX iht. EU nr. 2014/34/EU

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Ret dig efter det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal svare til eller overstige de faktiske driftsforhold i dit system, og tilslutningsdimensionen skal svare til rørets diameter.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykstyring, tilbageflow osv.) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en fagmand? Ved enklere afspærringsventiler kan montagen også udføres af en husejer, ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en fagmand, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: BRA.02.622 - GV serie 02 - rustfrit stål
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:12:15

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

T Avatar af forfatter 16.11.2026 15:36
Would you be so kind as to confirm whether this DN 15 flanged ball valve is suitable for installation in a closed-loop heating system operating at a maximum temperature of 90 °C and whether the PN 16 flange rating is sufficient for such an application?
A Avatar af forfatter 16.11.2026 15:36
Yes, this valve will handle that without any issue. It's rated for temperatures from -25 °C up to +150 °C and pressure up to 16 bar, so a heating system running at 90 °C is well within its limits. Just keep in mind it's meant for shut-off duty, not for regulating flow.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.