Eshop roka 2025 s vykurovacou technikou

Radiator kugleventil - til selvstående systemer med mulighed for reduceret flow - 1/2"; direkte IVAR.CIM 92

Kode: CIM92VA015
Ikke bedømt Detaljer om bedømmelse
38,99 € –20 %
Vykurovacia technika Radiátorový guľový kohút-pre samotiažne systémy s možnosťou redukovateľného prietoku-1/2"; priamy
38,99 € –20 % 31,19 € / stk. 25,36 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Radiator kugleventil - lige, IVAR.CIM 92, størrelse: 1/2", pakning: 1 stk i pose / 25 stk i kasse
- til selvstående systemer med mulighed for reduceret flow

 

  • PN 10, T = +120 °C
  • til tilslutning til stålrør
  • IVAR.CIM 92 nominelt flow Kv 8,1
  • materiale forniklet messing CW617N

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Ret dig efter det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal matche eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal matche rørdiameteren.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykregulering, tilbageflow osv.) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Ved enklere afspærringsventiler kan montagen også udføres af en gør-det-selv-mand, ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en professionel, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: lige / vinklet - klassisk
Garanti: 2 år
Vægt: 0.232 kg
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:03:20

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

O Avatar af forfatter 17.11.2026 11:27
Hi there, we've got an old gravity-fed heating system at home and my dad wants to fit this on the radiator pipe which is 1/2". Can it actually handle gravity systems okay, and is it fine for normal steel pipes?
A Avatar af forfatter 17.11.2026 11:27
Yeah, this one's actually made for gravity systems - that's exactly what the IVAR.CIM 92 is designed for, with adjustable flow so you can balance it out. It's rated PN 10 and up to 120°C, and it connects straight onto steel pipe, so a 1/2" steel radiator pipe is no problem. It's basic shut-off/regulating fitting, so a handy person can usually fit it themselves without needing a plumber.
T Avatar af forfatter 23.10.2026 22:45
Zanima me, ali je ta kroglični ventil IVAR.CIM 92 primeren za priključitev na jekleno cev 1/2" v starejšem gravitacijskem sistemu, kjer obratovalna temperatura občasno doseže okoli 90 °C. Prav tako prosim za podatek, ali je mogoče s tem ventilom trajno zmanjšati pretok, ne le popolnoma zapreti dovod.
A Avatar af forfatter 23.10.2026 22:45
Pozdravljeni, da, ta ventil je narejen prav za priključitev na jeklene cevi 1/2" in prenese temperaturo do +120 °C ter tlak PN 10, tako da je vaših 90 °C brez težav znotraj dovoljenih vrednosti. Omogoča tudi nastavljanje oziroma zmanjševanje pretoka, ne le popolno zaprtje, nazivni pretok (Kv) znaša 8,1. Izdelan je iz niklane medenine CW617N. Če bi potrebovali še kotno izvedbo, jo najdete v sorodni kategoriji kotnih kroglastih ventilov.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.