Eshop roka 2025 s vykurovacou technikou

Flange kontraventil (kugle) - serie 07- DN 80; L=260mm BRA.F7.100

Kode: F7100080
Ikke bedømt Detaljer om bedømmelse
393,60 € –20 %
Vykurovacia technika Prírubová spätná klapka (gulôčka) - séria 07- DN 80; L=260mm
393,60 € –20 % 314,88 € / stk. 256 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Flange kontraventil (kugle), BRA.F7.100, størrelse: DN 80, længde: 260 mm

 

  • maks. tryk 16 bar 
  • montering mellem flanger PN 10/PN 16 
  • T = -10°C til maks. +70 °C
  • til spildevand, tykke og viskose væsker, landbrugsformål
  • materiale – hus, låg: støbejern GJS 400-15, kugle: stål belagt med NBR
  • min. tryk 0,2 bar
  • min. modtryk 0,5 bar
  • ikke egnet til damp og gasser

Yderligere parametre

Kategori: BRA.F7.100 - fladskive kontraventiler (kugle)
Garanti: 2 år
Vægt: 15.85 kg
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:04:38

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

C Avatar af forfatter 14.11.2026 07:08
Buenos días, un saludo, mi padre quiere ponerla en una tubería de agua residual y me da miedo que no aguante si el líquido es muy espeso o viscoso. ¿Esta válvula de bola DN 80 sirve para eso o solo para agua normal?
A Avatar af forfatter 14.11.2026 07:08
Hola Carlos, tranquila, esta válvula BRA.F7.100 está diseñada específicamente para agua residual, líquidos densos y viscosos según sus especificaciones. Funciona bien con materiales como la fundición y la bola revestida de NBR, así que cubre perfectamente esa necesidad. Si necesitas algo similar para otras aplicaciones agrícolas, echa un vistazo a nuestra categoría de válvulas antirretorno de brida.
T Avatar af forfatter 10.09.2026 08:05
Táto klapka DN 80 sa dá použiť aj v systéme kde je voda ohriata na vyššiu teplotu, napr. pri kotli? Alebo je to len na studenú vodu?
A Avatar af forfatter 10.09.2026 08:05
Prírubová spätná klapka série 07 v DN 80 je bežne určená pre vykurovacie systémy, takže teplá voda z kotla by nemala byť problém. Presné teplotné a tlakové limity si ale odporúčame overiť v technickej dokumentácii k tomuto konkrétnemu produktu, ktorú nájdete na stránke. Ak si nie ste istí, pokojne nás kontaktujte, radi to upresníme.
V Avatar af forfatter 28.07.2025 11:15
Dobrý den, poptávám náhradu za tuto zpětnou klapku na vodovodním řádu. Délka klapky je 340 mm. Je umístěna za vodoměrem přívodu studené vody. Mohu poprosit o cenovou nabídku, pokud máte k dispozici vhodnou náhradu? S pozdravem Viktor
A Avatar af forfatter 28.07.2025 11:16
Dobrý deň, všetky u nás dostupné položky nájdete na e-shope : https://www.atria.sk/bra-f5-000/. Pekný deň.
M Avatar af forfatter 21.01.2022 13:15
Môže sa spätná klapka (gulička) s kontrolným otvorom BRA.F7.000, montovať ako stojatá? Potrebujem dať do ponuky stojatú klapku DN125 Ďakujem za odpoveď.
A Avatar af forfatter 21.01.2022 13:15
Dobrý deň, áno dá sa montovať ako stojatá. Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.