Eshop roka 2025 s vykurovacou technikou

Kugleventil gas - 6/4"FF; håndtag IVAR.G 51

Kode: 3804015030
Ikke bedømt Detaljer om bedømmelse
kr813,72 –20 %
Vykurovacia technika Guľový uzáver plyn - 6/4"FF; páčka
kr813,72 –20 % kr650,99 / stk. kr529,26 ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Kugleventil gas, IVAR.G 51, størrelse: 6/4" FF, pakning: 2 stk. i pose / 16 stk. i kasse

 

  • PN 5, T = - 20 °C til +60 °C for gas
  • PN 40, T = -30 °C til +120 °C for vand
  • fuldt gennemløb
  • indvendigt - indvendigt gevind FF, udførelse håndtag
  • materiale forniklet messing CW617N

Ofte stillede spørgsmål

  • Hvad er dette rør beregnet til? Den præcise bestemmelse (vandforsyning, varme, gas, solenergisystemer, trykluft osv.) findes i beskrivelsen og de tekniske specifikationer for dette produkt - forskellige materialer (rustfrit stål, kulstofstål) har forskellig korrosionsbestandighed og er certificeret til forskellige medier.
  • Hvordan samles dette rør? Normalt med press- eller svejsede samlinger, afhængigt af det specifikke system og diameteren - sørg for at bruge kompatible fittings af samme system.
  • Skal monteringen udføres af en professionel? Ja, især ved gasforsyning, trykluft eller ved svejsede samlinger er monteringen forbeholdt en person med passende kvalifikationer.

Yderligere parametre

Kategori: IVAR.G 51, FIV.80010 - indvendige - indvendige håndtag
Garanti: 2 år
Vægt: 1.377 kg
EAN: 8016603083625
Gevindstørrelse: 6/4"
Produkttype: kugleafspærring
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 13.04.2026 1:10:22

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

U Avatar af forfatter 01.11.2026 20:29
Imam obstoječo plinsko inštalacijo z notranjim navojem 6/4" na obeh straneh - ali lahko ta ventil vgradim direktno brez dodatnih fitingov? Zanima me tudi, ali je primeren za vgradnjo na plinsko napeljavo v kotlovnici ali je bolj namenjen vodovodni instalaciji.
A Avatar af forfatter 01.11.2026 20:29
Ventil ima na obeh straneh notranji navoj 6/4" (FF), tako da ga lahko vgradite direktno med dva zunanja navoja brez dodatnih fitingov. Je polnopretočen in certificiran tako za plin (PN 5, -20°C do +60°C) kot za vodo (PN 40, -30°C do +120°C), torej je primeren tudi za plinsko napeljavo v kotlovnici. Glede na to, da gre za plinsko inštalacijo, vam vseeno priporočamo, da montažo prepusti usposobljenemu inštalaterju.
V Avatar af forfatter 07.10.2026 21:43
Zdravím, plánujem montáž tohto guľového uzáveru na plynovod a chcel by som sa uistiť, či je materiál páčky (niklovaná mosadz CW617N) vhodný pre prevádzku pri teplotách do 60 °C a aký je maximálny tlak PN, na ktorý je certifikovaný?
A Avatar af forfatter 07.10.2026 21:43
Dobrý deň, áno, tento model je určený aj pre plyn s tlakom PN 40 a vydrží teploty od -20 do +60 °C. Páčka je vyrobená z niklovanej mosadze CW617N, čo je štandardný materiál pre túto aplikáciu. Pri inštalácii na plyne však odporúčame nechať prácu vykonať len osobou s príslušnou odbornou spôsobilosťou.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.