Eshop roka 2025 s vykurovacou technikou

Mellemliggende fjederreturventil - W6 serie; rustfrit stål - DN 25; L=21mm BRA.W6.626

Kode: W6626025
Ikke bedømt Detaljer om bedømmelse
129,15 € –20 %
Vykurovacia technika Medziprírubový spätný ventil pružinový - séria W6; nerez - DN 25; L=21mm
129,15 € –20 % 103,32 € / stk. 84 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Mellemflange kontraventil - fjedrebelastet, BRA.W6.626, størrelse: DN 25, længde: 21 mm

 

  • maks. tryk 40 bar
  • mellem flanger PN 16/PN 10/PN 6 iht. STN EN 1092-1
  • T = -20 °C til maks. +350 °C
  • til opvarmning og aircondition (HVAC), vandforsyning, pumpe stationer, olie og kulbrinter, kemisk industri
  • materiale: hus, skive og mellemvæg - rustfrit stål A351 CF8M, pakning - metal-metal
  • montering i alle positioner
  • minimum modtryk 0,1 bar
  • åbningstryk iht. dimension – se datablad
  • anvendelse til vand med et indhold på op til 50 % glykoler
  • ATTEST til drikkevand

 

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Følg det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal matche eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal matche rørdiameteren.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykregulering, tilbageflow osv.) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Enkle afspærringsventiler kan monteres af en gør-det-selv-mand, men ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en professionel, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: BRA.W6.626 - kontraventiler - fjederbelastede rustfri
Garanti: 2 år
Vægt: 0.294 kg
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:03:41

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

M Avatar af forfatter 09.11.2026 10:34
Buenos días, un saludo, me gustaría saber si esta válvula antirretorno BRA.W6.626 resulta adecuada para una instalación de calefacción que trabaja con agua glicolada al 30% y una presión de servicio habitual de 6 bar, dado que necesito confirmar la compatibilidad antes de proceder a la compra. Asimismo, quisiera confirmar si la presión mínima de contracorriente necesaria para su correcto cierre es compatible con circuitos de baja presión diferencial.
A Avatar af forfatter 09.11.2026 10:34
Buenos días Mario. Sí, esta válvula está preparada para agua con hasta un 50% de glicol, así que su 30% entra perfectamente dentro de rango, y con 6 bar de servicio va sobrada porque soporta hasta 40 bar entre bridas. Respecto al cierre, necesita solo 0,1 bar de contrapresión para actuar, por lo que funciona bien incluso en circuitos con poca presión diferencial. Para el dato exacto de presión de apertura según el DN 25 te recomendamos revisar la ficha técnica del producto.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.