Eshop roka 2025 s vykurovacou technikou

Termostatisk blandeventil til varmt brug - 3/4"; Kv 1,9; +36°C til +50°C IVAR.MIX T5

Kode: 507035
Ikke bedømt Detaljer om bedømmelse
130,38 € –20 %
Vykurovacia technika Termostatický zmiešavací ventil pre TV - 3/4“; Kv 1,9; + 36° C až + 50° C
130,38 € –20 % 104,30 € / stk. 84,80 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Termostatisk blandeventil til TV, IVAR.MIX T5, størrelse: 3/4", indstilling: +36˚ C til +50˚ C

 

 

Bemærk: F - koldt vand indløb, C - varmt vand indløb

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af armatur/ventil? Ret dig efter det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal svare til eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal svare til rørdiameteren.
  • Hvordan fungerer denne armatur/ventil? Det præcise funktionsprincip (lukning, trykregulering, tilbageflow osv.) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en fagmand? Ved enklere afspærringsarmaturer kan montagen også udføres af en gør-det-selv-mand, ved regulerings- og sikkerhedsarmaturer (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en fagmand, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: Blandeventiler til TV
Garanti: 2 år
Vægt: 0.668 kg
Gevindstørrelse: 3/4"
Armaturtype: overstrøms- / termoregulerende ventil
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 13.04.2026 1:04:50

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

M Avatar af forfatter 09.11.2026 21:59
Mam instalację pracującą przy ciśnieniu ok. 6 barów i temperaturze wody ciepłej dochodzącej czasem do 65°C - czy ten zawór to wytrzyma? Chciałbym też wiedzieć, czy sam mogę go zamontować, czy to jednak robota dla fachowca.
A Avatar af forfatter 09.11.2026 21:59
Jak najbardziej wytrzyma - zawór ma PN 10, czyli obsługuje ciśnienie do 10 barów, a temperatura pracy do 90°C, więc Pana 65°C nie jest żadnym problemem. Co do montażu - to armatura regulacyjna (ustawia temperaturę wody w zakresie 36-50°C), więc jak przy każdym tego typu urządzeniu zalecamy montaż przez fachowca, bo błędne podłączenie dopływów zimnej i ciepłej wody (oznaczone F i C) zaburzy działanie całego zaworu.
J Avatar af forfatter 18.01.2022 07:50
Dobrý deň Potreboval by som zmiešavací termostatický ,ideálne mechanicky ventil ktorý by mi púšťal do iba kúrenia prednastavenú konstatnu teplotu vody napríklad 60 stupňov,resp tu teplotu ktorú by som si navolil aj v prípade že budem kúriť na 80-90 stupňov a prebytok teploty by mi hneď smerovalo do akumulačnej teploty a po vyhasnutí v kotli mi zase bude púšťať takto nastavenú teplotu z akumulačnej nádoby.. .Bude toto takto fungovať? Ďakujem
A Avatar af forfatter 18.01.2022 07:53
Dobrý deň, áno bude to fungovať, ale na to sa dáva zmiešavací ventil https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/regulacne-a-poistne-armatury/zmiesavacie-ventily/ a servo https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/regulacne-a-poistne-armatury/servopohony-k-ventilom-mix/, plus regulácia adex https://www.atria.sk/regulacia-adex-comfort-12/ Prajem pekný deň.
J Avatar af forfatter 18.01.2022 07:53
Dobry den A ked som tak na to este pozeral to zdaleka nieje cela investicia,asi bude treba este dokupit servopohony na gulove ventily Ta regulacia podla popisu dokaze vela ale ,neviem si prestavit ako zabrani po vyhasnuti kotla tomu aby teplo z AKU neprehanalo cez kotol a na zakladade coho a ako by rozpoznala ze teplo v systeme je z kotla a nie z akumulacky..Vie to vobec rozpoznat? Dik
A Avatar af forfatter 18.01.2022 07:52
Dobrý deň, ešte ma napadlo : https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/regulacne-a-poistne-armatury/termoreg-prepustacie-ventily/ alebo s čerpadlom : https://www.atria.sk/vykurovacia-technika/stacionarne-kotly-a-zasobniky/klasicke-a-splynovacie-kotly/ladomaty-regulacie/ Pekný deň.
J Avatar af forfatter 18.01.2022 07:52
Dobry den Dakujem.Tie termo ventily..To su tie co sa pouzivaju na ochranu spiatocky na kotloch.??
A Avatar af forfatter 18.01.2022 07:52
Áno to sú tie.
J Avatar af forfatter 18.01.2022 07:51
Dobry den No jeden mam tiez na kotli na spiatocke (esbe) ale ci by to fungovalo aj tuto ..,veru neviem .Ja na nich nastavena minimalna teplota ale potreboval by som osetrit MAX teplotu.Ci robia sa aj v opacnom prevedeni s preddefinovanou MAX teplotou? Preco?Mam od Vas nakupenu tu sedu penovu izolaciu na potrubiach a kedze kurim do akumulacky,niekedy aj 95° tak mi tu izolaciu pravidelne zoskvari a odpadne a tak by som tomuto rad predisiel..Mam tam sice 3cestny zmiesavaci ventil ,tiez esbe ale na nom sa neda nastavit teplota ,teplotu ktoru pusta do systemu , ta sa priebezne meni v zavislosti od teploty kotla,intenzity v ohnisku a nemam cas stale stat pri kotli a regulovat ventil..tak preto hladam jednoduchsie a hlavne mechanicke riesenie... Dakujem
A Avatar af forfatter 18.01.2022 07:51
Dobrý deň, v opačnom nie tam sa dáva potom regulátor - adex uvedený nižšie : https://www.atria.sk/regulacia-adex-comfort-12/ Ak jednoduchšie tak jednoznačne ten ventil čo som písal a maximálnu teplotu to neviem ohraničiť. Prajem pekný deň.
J Avatar af forfatter 18.01.2022 07:51
Dobry den Prosim Vas..zhanam termostat spalin,alebo kominovy..Nieco co mi bude podla teploty kominovej rury spustat a vypinat kotlove cerpadlo..Mate take nieco v ponuke?Nic take som tu na Vasej stranke nenasiel..
A Avatar af forfatter 18.01.2022 07:50
Dobrý deň, skúste si pozrieť : https://www.atria.sk/prilozny-termostat-emos-s-kapilarou/ Prajem pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.