Eshop roka 2025 s vykurovacou technikou

Termostatisk blandeventil til varmt brug - 3/4"F; Kv 1,8; +30°C til +48°C IVAR.C 520

Kode: 520530
Den gennemsnitlige produktvurdering er 5,0 ud af 5 stjerner. 1-vurdering Detaljer om bedømmelse
145,14 € –20 %
Vykurovacia technika Termostatický zmiešavací ventil pre TV - 3/4"F; Kv 1,8; + 30° C až + 48° C
145,14 € –20 % 116,11 € / stk. 94,40 € ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

Termostatisk blandeventil til TV, IVAR.C 520, størrelse: 3/4" F, Kv 1,8

 

  • PN 10, T = +90 °C
  • kontinuertligt indstillingsområde +30 °C til +48 °C
  • indvendigt gevind FFF
  • materiale forniklet messing CW617N

 

Bemærk: Indløb for koldt og varmt vand farvekodet.

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige type og størrelse af fittings/ventiler? Følg det nominelle tryk (PN) og driftstemperaturen (T) angivet i de tekniske specifikationer - de skal matche eller overstige de faktiske driftsforhold i dit system, og tilslutningsstørrelsen skal matche rørdiameteren.
  • Hvordan fungerer denne fitting/ventil? Det præcise funktionsprincip (lukning, trykregulering, tilbageflow osv.) afhænger af den specifikke type - en detaljeret beskrivelse af funktionen findes ovenfor ved dette produkt.
  • Skal monteringen udføres af en professionel? Ved enklere afspærringsventiler kan montagen også udføres af en gør-det-selv-mand, ved regulerings- og sikkerhedsventiler (sikkerhedsventiler, reduktionsventiler) anbefaler vi altid en professionel, da det drejer sig om elementer med en sikkerhedsfunktion.

Yderligere parametre

Kategori: Blandeventiler til TV
Garanti: 2 år
Vægt: 0.434 kg
EAN: 8016615012446
Tilgængelighed: På lager eller hos leverandøren
Seneste prisopdatering: 19.06.2026 8:37:20

Produktvurdering

Den gennemsnitlige produktvurdering er 5,0 ud af 5 stjerner. 1-vurdering
5
1x
4
0x
3
0x
2
0x
1
0x

Giv en bedømmelse

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Liste over vurderinger

5
MŠ Avatar af forfatter Produktvurderingen er 5 ud af 5 stjerner. 19.07.2022
ok

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

J Avatar af forfatter 09.11.2026 18:17
Jde tímto ventilem nastavit teplota na 45°C a bude se tam pak udržovat stabilně, i když teče teplá voda třeba ze dvou koupelen najednou? A je montáž na 3/4" závit něco, co zvládnu sám?
A Avatar af forfatter 09.11.2026 18:17
Rozsah nastavení má od 30 do 48°C, takže 45°C bez problému nastavíte plynule přímo na ventilu. Jde o termostatickou armaturu, která udržuje teplotu podle nastavení bez ohledu na odběr, nicméně jde o regulační prvek, takže montáž bychom spíš doporučili svěřit odborníkovi, aby bylo zapojení studené a teplé větve správně podle barevného značení.
R Avatar af forfatter 02.09.2026 08:05
Zdravím, mám bojler s výstupnou teplotou 65°C a rozvod teplej vody do sprchy a umývadla - stačí tento ventil s rozsahom do 48°C, alebo potrebujem niečo s vyšším nastavením?
A Avatar af forfatter 02.09.2026 08:05
Na bežné použitie v domácnosti (sprcha, umývadlo) rozsah 30–48°C úplne postačuje, pretože teplá úžitková voda sa štandardne používa práve v tomto pásme. Ventil zmiešava horúcu vodu z bojlera so studenou a na výstupe udržiava nastavenú teplotu – nie je teda dôležité, aká teplota ide do neho, ale aká ide z neho. Ak by ste chceli napájať aj podlahové kúrenie alebo iný okruh s vyšším požiadavkom, tam by ste potrebovali iný rozsah.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.