Eshop roka 2025 s vykurovacou technikou

Systemisolering - tør system - 1000x500mm (0,50m2) - 10m2/20stk IVAR.TR 01-RENOVA

Kode: TR01
Ikke bedømt Detaljer om bedømmelse
kr137,91 –20 %
Vykurovacia technika Systémová izolačná doska - suchý systém - 1000x500mm (0,50m2) - 10m2/20ks
kr137,91 –20 % kr110,33 / m2 kr89,70 ekskl. moms Mål pris:
International levering
På lager hos leverandøren

Detaljerede oplysninger

Detaljeret beskrivelse af produktet

System isoleringsplade - tørsystem, IVAR.TR 01-RENOVA, pakke: 10 m2 / 20 stk

 

  • lægningsafstand 167 / 250 / 333 mm
  • brugsdimension 1000 x 500 mm = 0,5 m2
  • isolerings tykkelse 25 mm
  • til termisk isolering af gulvvarme uden beskyttelsesfolie
  • låse til montering af refleksionsplader kun til rør Ø 16 mm ALPEX eller PEX 

Ofte stillede spørgsmål

  • Hvordan vælger jeg den rigtige fordeler/tilbehør? Ret dig efter antallet af nødvendige kredse og tilslutningsdimensionen - den skal svare til diameteren på hovedforsyningsrøret fra varmekilden.
  • Skal monteringen udføres af en fagmand? Montering af selve fordelerrøret og dets tilbehør kan også udføres af en dygtig handyman, men vi anbefaler, at tilslutningen til et funktionelt varmesystem og dets indstilling udføres af en VVS-tekniker.

Yderligere parametre

Kategori: IVAR IZOLÁCIA
Garanti: 2 år
Vægt: 0.562 kg
Tilgængelighed: På lager eller hos leverandøren
Posledná aktuálizacia ceny: 29.05.2026 12:57:53

Produktvurdering

Vær den første, der skriver en artikel til dette emne!

Udfyld ikke dette felt

Hvordan vil du bedømme dette produkt? Vælg mellem 1 og 5 stjerner, hvor 1 er den dårligste og 5 den bedste bedømmelse.

Diskussion

Udfyld ikke dette felt

Liste over diskussioner

G Avatar af forfatter 29.10.2026 17:35
Ho preso i pannelli IVAR.TR 01-RENOVA per il riscaldamento a secco, ma sono confuso: questi incastri vanno bene solo per tubi da 16mm o se uso tubi più grandi devo cambiarli?
A Avatar af forfatter 29.10.2026 17:35
Ciao Giovanni, secondo le specifiche del prodotto gli incastri sono progettati specificamente solo per tubi Ø 16 mm ALPEX o PEX. Se prevedi di usare diametri diversi, dovresti verificare la compatibilità con altri accessori della categoria IVAR ISOLAMENTO.
M Avatar af forfatter 23.10.2026 10:52
Dobry den uz sme boly spolu v kontakte chcel by som sa len spytat ja potrebujem vyslednu vysku kurenia do 6cm cize potrebujem slim dosky na suche vodne podlahove kurenie mate aj takuto moznost
M Avatar af forfatter 27.10.2026 13:37
Prepacte ze mam tolko otazok :) ale prerabam len raz :) a nebude to uz moc tenke neni lepsia izolacia od zakladu aspom ta 30ka
A Avatar af forfatter 27.10.2026 13:37
Dobrý deň, vôbec sa neospravedlňujte. Pri jednorazovej rekonštrukcii má zmysel vybrať správne hneď. Ak myslíte 30 mm dosku, teda polystyrén UHPD, tak áno, izoluje lepšie ako 25 mm dosku IVAR. Podľa údajov výrobcu má tepelný odpor 0,71 m²K/W a je z EPS s tepelnou vodivosťou 0,038 W/(m.K). Je len o 5 mm vyššia, takže skladbu zásadne nezvýši. Pod 6 cm sa dostanete, ak vrchná vrstva a nášľapná krytina spolu nepresiahnu približne 3 cm. Tento údaj som vypočítal z hrúbky dosky. Dosku UHPD výrobca označuje ako vhodnú aj pre veľmi vysoké zaťaženie. Pre obytné priestory je teda s rezervou. Používa sa rúrka 16 mm a doska sa kombinuje s hliníkovými roznášacími plechmi. Čím lepšia izolácia smerom nadol, tým menej tepla odíde do podkladu. Najviac to oceníte, ak je pod podlahou zemina, nevykurovaná miestnosť alebo studený podklad. Ak je pod ňou vykurovaná miestnosť, rozdiel oproti 25 mm doske bude malý. Polystyrén UHPD 30 mm: https://www.atria.sk/polystyren-pre-suchu-podlahovku-uhpd--stirotermal-dry/
A Avatar af forfatter 23.10.2026 10:52
Dobrý deň, Áno, suchý systém podlahového kúrenia s nízkou skladbou máme. Na vašu požiadavku (výsledná výška do 6 cm) by som odporučil tieto polystyrénové systémové dosky pre rúrku 16 mm: Systémová doska pre suchý systém IVAR TR 01 RENOVA – hrúbka izolácie 25 mm, je to naša najtenšia doska, určená na rekonštrukcie: https://www.atria.sk/izolacna-doska-ivar-tr-01-renova/ Polystyrén pre suché podlahové kúrenie UHPD – celková výška 30 mm: https://www.atria.sk/polystyren-pre-suchu-podlahovku-uhpd--stirotermal-dry/ Oba systémy sa kombinujú s hliníkovými roznášacími plechmi, ktoré vkladáte do dosky pod rúrku: https://www.atria.sk/roznasaci-plech-uhps/ Do celkovej výšky sa okrem dosky počíta aj vrchná vrstva (suchý poter alebo podlahové dosky) a nášľapná krytina. Či sa do 6 cm zmestíte, preto závisí od nich. Samotné dosky majú 25 mm, resp. 30 mm.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.